Bending Machines - Models  

DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING MACHINE

  
 
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING MACHINE: The middle of the disc is fixed and by assembling a STIR-UP pin into the fixed place in the middle of the disc it has stir-up( 130°,90°,90°,90°,130°) bending capacity between 7.000 and 10.000 times in normal working hours..Working speed is not slow as the other bending machines and it has 14 revolution in 1minutes capacity,so it has two times bending capacity when compared the other bending machines.
It is the best solution for the stir-up bending type which is the most time wasting and hardest type among all the bending types in the working sites.
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING MACHINE: Bending capacity is from 2mm to 22mm
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING MACHINE is processed both on right and left sides via switch on the control board besides has capacity of working both manual and automatic.
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING MACHINE: Due to being only 120kgs can be easily carried in the building zones and even in the intermediate floors.
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING MACHINE: Despite having small measurements the working capacity is satisfactory according to users and QC feedbacks.
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING MACHINE: STIR-UP bending type(130° / 90° / 90° /90° / 130°),spiral bending type and 45º / 90º / 180º bending types are continuously processed.
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING MACHINE: With only one button STIR-UP bending type(130° / 90° / 90° /90° / 130°) is continuously processed till you deactivate the bending.
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING MACHINE: Works both electrical motor with 380Volt and also can be changed with another Volt application according to demands. Electronically automation section processes with 24 Volt and is protected against to all environmental effects. It can go on processing in all weather conditions.
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING MACHINE: The after sales service can be maintained easily by the operator.
WARRANTY: Warranty duration is 2 years against to manufacturing defects.
All of the products are certified according to international TS EN ISO 9001: 2000, OHSAS 18001:1999 and CE standards.

DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING MACHINE BENDING CAPACITY
 

ELECTRICAL BENDING CAPACITY

1.1 KW /  2 HP

ENGINE  SPEED

1.500  / 14 Rpm

BENDING CAPACITY

Ø 22 mm

LENGHT

66 cm

WIDHT

51 cm

HEIGHT

82 cm

WEIGHT

120 Kgs
 



DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING MACHINE: As in our all machines working sides of all the replacement parts are heat-treated and the surface defection is decreased to 0%.

OTHER PRODUCTS OF DCK MACHINERY
Plate Compactor, Asphalt Roller, Aspalt Cutter, Bar Cutting Machine, Iron Cutting Machine, Iron Bending Machines, Concrete Mixer

DCK MACHINE BAR CUTTING MACHINE

DCK MACHINE BAR BENDING MACHINE
 
TECHNICAL DETAILS OF DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING MACHINE
 

Number Of Iron

             THE BAR IN mm²

QUANTITY OF BAR

45 kgs/mm²

QUANTITY OF BAR

 

45 kgs/mm²

          1

Ǿ          22

Ǿ          20

Ǿ          18

          2

Ǿ          20

Ǿ          18

Ǿ          16

          3

Ǿ          16

Ǿ          14

Ǿ          12

          4

Ǿ          14

Ǿ          12

Ǿ            8

          5

Ǿ          10

Ǿ            8

Ǿ            6

          6

Ǿ            8

Ǿ            6

Ǿ           --

          8

Ǿ            6

Ǿ           --

Ǿ            --

 
 

Ivogsan Ari Sanayi Sitesi 684 Sokak No:107 Ostim/ANKARA/TURKEY
Tel: +90 312 394 47 52 Fax: +90 312 394 47 54
E-Mail:info@dck-makina.com.tr
   Web: www.dck-makina.com.tr
 

Web Design
Ay Design